Tripp Lite PDU Monitored 2.9kW 120V 24 5-15/20R 30A LX Platform 0URM TAA - PDUMNV30LX

SpecificationsManufacturer: Tripp LiteManufacturer Part Number: PDUMNV30LXManufacturer Website Address: http://www.tripplite.comBrand Name: Tripp LiteProduct Model: PDUMNV30LXProduct Name: PDUMNV30LX 2.9kW Single-Phase Monitored PDUMarketing Information: The PDUMNV30LX 2.9kW Single-Phase Monitored PDU provides real-time remote monitoring of voltage, frequency and load levels via built-in network connection. Recommended for IT and industrial applications, the vertical PDU features 24 NEMA 5-15/20R outlets with included cord retention brackets to prevent cables from becoming accidentally disconnected. A 10-foot cord with NEMA L5-30P plug connects the PDU to a compatible AC power source, generator or protected UPS.The built-in Java-free HTML5-based LX Platform network interface enables full remote access for PDU status monitoring and email notifications via secure web browser, SNMP, telnet or SSH. It supports 10/100 Mbps auto-sensing for optimum communication with an Ethernet network. Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities. Protocols supported include IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP.A digital ammeter allows you to monitor power consumption for both breakered load banks, as well as the total load to ensure they remain well below maximum capacity with no danger of overload. The PDU mounts in 0U of space in EIA-standard 19-inch racks using the included toolless mounting buttons or the included rack-mounting brackets. Use the included PDUMVROTATEBRKT kit to install the unit with outlets facing the rear for better airflow or equipment access.Features Distributes and Monitors Network-Grade AC Power 2.9kW 120V 20A monitored PDU with single-phase input NEMA L5-30P with 10 ft. cord connects to compatible AC power source Firmware upgrades support future product enhancements 24 NEMA 5-15/20R Outlets Distribute Power Cord retention brackets prevent cables from becoming accidentally disconnected Digital Ammeter Reports power consumption for both breakered load banks, plus total output current Supports IP-address self-ID Rotates 180° for easy reading at either angle Built-In LX Platform Interface Allows full remote access for power monitoring with email notifications via secure web browser, SNMP, telnet or SSH Supports 10/100 Mbps auto-sensing for communication with an Ethernet network Optional EnviroSense2 modules (sold separately) provide a variety of environmental monitoring capabilities No Java required Broad Communications Compatibility Supports IPv4, IPv6, HTTP, HTTPS, SMTP, SNMPv1, SNMPv2, SNMPv3, telnet, SSH, FTP, DHCP and NTP Supports automatic and manual assignment of IP address Easy 0U Installation in EIA-Standard 19 in. Racks Mounts vertically using included toolless buttons or rack-mounting brackets Included PDUMVROTATEBRKT allows mounting with rear-facing outlets TAA-Compliant Compliant with the Federal Trade Agreements Act (TAA) for GSA Schedule purchases Product Type: PDUTechnical InformationInput Receptacles: NEMA L5-30POutput Receptacles: 24 x NEMA 5-15/20RProtection Type: Overload ProtectionPower DescriptionInput Voltage: 120 V ACOutput Voltage: 120 V ACPower Rating (Watt): 2880 WInput Current: 30 AManagementManagement: IPv4 IPv6 HTTP HTTPS SMTP SNMPv1 SNMPv2 SNMPv3 telnet SSH FTP DHCP NTP Interfaces/PortsNetwork (RJ-45): YesPhysical CharacteristicsMounting Orientation: VerticalPlacement: RackRack Height: 0UHeight: 70"Width: 2.2"Depth: 1.8"Weight (Approximate): 11.50 lbMiscellaneousEnvironmentally Friendly: YesEnvironmental Certification: RoHSTAA Compliant: Yes

• Product images are for illustrative purposes only therefore the delivered product may vary from the one shown above.
• In some cases, packaging may differ from OEM/original retail box. For bulk orders that are packaged together, product manuals or CDs may not always be available for each item.
• The shipping cost added at the checkout is a general estimate which is subject to change depending on size/weight/quantity of ordered goods.
• Orders that contain end of life (EOL) products that are no longer in production may be replaced by a compatible product with the same FRU number offering same functionality.
• Refurbished printers may not have full ink cartridges or laser toners.
• Once an order is processed at our warehouse, it cannot be cancelled. A returned order will likely incur a restocking fee. See RMA page for details about restocking fees.
• Please note if you are concerned about any of the above conditions or have any questions, we highly recommend that you contact us on sales@ithardwaregroup.co.uk or call 020 37908599 before placing an order