Supermicro SuperStorage Server SSG-6048R-E1CR36H Dual LGA2011 1280W 4U Rackmount Server Barebone System (Black)

Specifications

• Mfr Part Number: SSG-6048R-E1CR36H
• Motherboard: Super X10DRH-iT
• Processor: Dual LGA2011
  • Support Intel Xeon E5-2600 v3 Processors
  • Support up to 18 Cores
  • Cache up to 45 MB
  • QPI up to 9.6 GT/s
  • Support up to 145W TDP
• Chipset: Intel C612 Express
• Memory: 16x 288pin DDR4-2133/ 1866/ 1600 DIMM Slots; Supports up to 1TB ECC/Load Reduced Memory or up to 512GB ECC/REG Memory
• Slots: 1x PCI-Express 3.0 x16 Slot, 6x PCI-Express 3.0 x8 Slots
• SATA: SATA3 Support RAID 0, 1, 5, 10
• SAS: SAS3 via LSI 3108 AOC; HW RAID
• Video: ASPEED AST2400 BMC Graphics
• LAN: Intel X540 Dual Port Gigabit Ethernet Controller; 1x Realtek RTL8201N PHY (dedicated IPMI)
• Drive Bays: 36x Hot-swap 3.5" Hot-swap SAS3/SATA3 Drive Bays (Double-sided: 24 front + 12 rear drive bays)
• Backplane: SAS3/SATA3 Single Expander Per Backplane
• Ports: 2x USB 3.0 Ports, 2x USB 2.0 Ports, 1x Type A USB Port, 2x Serial Ports (1 rear, 1 via header), 1x VGA Port, 2x RJ45 LAN Ports, 1x RJ45 Dedicated IPMI LAN Port
• Form Factor: 4U Rackmount
• Power Supply: 1280W 80 PLUS Platinum Certified High-Efficiency (95%+) Power Supply
• System Cooling: 7x 80mm Middle Cooling Fans, Redundant Cooling
• Front Panel:
  • Buttons: Power On/Off, System Reset
  • LEDs: Power Status, Hard Drive Activity, 2x Network Activity, System Overheat, Power Fail
• Color: Black
• Dimensions (WxDxH): 17.2 x 27.5 x 7.0 inch / 437.0 x 699.0 x 178.0 mm
• RoHS Compliant

• Product images are for illustrative purposes only therefore the delivered product may vary from the one shown above.
• In some cases, packaging may differ from OEM/original retail box. For bulk orders that are packaged together, product manuals or CDs may not always be available for each item.
• The shipping cost added at the checkout is a general estimate which is subject to change depending on size/weight/quantity of ordered goods.
• Orders that contain end of life (EOL) products that are no longer in production may be replaced by a compatible product with the same FRU number offering same functionality.
• Refurbished printers may not have full ink cartridges or laser toners.
• Once an order is processed at our warehouse, it cannot be cancelled. A returned order will likely incur a restocking fee. See RMA page for details about restocking fees.
• Please note if you are concerned about any of the above conditions or have any questions, we highly recommend that you contact us on sales@ithardwaregroup.co.uk or call 020 37908599 before placing an order