Tripp Lite SMARTPRO Series SMART1500LCDT Smart LCD 1500VA/900W Tower Line Interactive UPS System w/ LCD Display & USB Port

Brand:
(No reviews yet) Write a Review
Part Number #
SMART1500LCDT
Availability:
In Stock
MSRP: £703.30
£586.08
Inc. VAT
MSRP: £586.08
£488.40
Ex. VAT
— You save £117.22
Get Bulk Pricing
Don't like the price? Make an offer!

Description

SpecificationsMfr Part Number: SMART1500LCDTOutput:Output Volt Amp Capacity: 1500VAOutput kVA Capacity: 1.5kVAOutput Watt Capacity: 900W                                                                    Nominal Output Voltage Supported: 120VFrequency Compatibility: 50/60Hz (auto-selectable)Output Voltage Regulation (Line Mode): -10%, +6%Output Voltage Regulation (Battery Mode): +/- 5%Built-in UPS Output Receptacles: 10x 5-15R outletsSurge Suppression Only Outlets: 5x UPS outlets, 5x surge-only outletsOutput AC Waveform (AC Mode): Sine waveOutput AC Waveform (Battery Mode): PWM sine waveInput:Rated Input Current (at Maximum Load): 12ANominal Input Voltage Supported: 120V ACUPS Input Connection Type: 5-15PInput Circuit Breaker: 20AUPS Input Cord Length: 6ft / 1.8mRecommended Electrical Service: 15A 120VBattery:Half Load Runtime: 10 minutes (450W)DC System Voltage: 24VDCBattery Recharge Rate (Included Batteries): Less than 8 hours from 10% to 90%Voltage Regulation:Voltage Regulation Description: Automatic voltage regulation (AVR) maintains line power operation with an input voltage range of 92 to 150Overvoltage Correction: Input voltages between 129 and 147 are reduced by 15%Undervoltage Correction: Input voltages between 92 and 108 are boosted by 18%Leds Alarms & Switches:Front Panel LCD Display: LCD screen indicates input voltage, 5-bar battery charge level, overload, AVR, on battery and replace battery status; LCD screen rotates for rack/tower viewingAlarms: Audible alarm indicates power-failure and low-battery conditionsAlarm Cancel Operation: Power-fail alarm can be silenced using alarm-cancel switchSwitches: Power switch offers whole UPS power control; additional scroll and select buttons enable LCD configuration and selection optionsSurge/Noise Suppression:UPS AC Suppression Joule Rating: 650UPS AC Suppression Response Time: InstantaneousUPS Dataline Suppression: 1 line TEL/DSL (1 in / 1 out); 10/100Base T Ethernet; Coax jacks (1 set)EMI / RFI AC Noise Suppression: YesCommunications:Communications Interface: USB (HID enabled)Network Monitoring Port Description: Supports detailed monitoring of UPS and site power conditionsCommunications Cable: USB and DB9 Serial cabling includedWatchDog Compatibility: Supports Watchdog application, OS and hard-reboot restart options for remote applicationsLine/Battery Transfer:Transfer Time: 2 milliseconds (AC to battery mode), 6 milliseconds (battery to AC mode)Low Voltage Transfer to Battery Power (Setpoint): 92High Voltage Transfer to Battery Power (Setpoint): 150Special Features:Cold Start (Startup in Battery Mode During a Power Failure): Cold-start operation supportedGreen & High Efficiency Features: Greater than 95% efficiency - GREEN UPSCooling Method: FanCertifications: Tested to UL1778 (USA); Tested to CSA (Canada); Tested to NOM (Mexico); Meets FCC Part 15 Category A (EMI)Form Factor: TowerDimensions (WxDxH): 5.75 x 15.40 x 8.00 inch / 14.6 x 39.1 x 20.3 cmWeight: 29.4 Ibs / 13.3 kg
View AllClose

Read Before Ordering

  • Product images are for illustrative purposes only therefore the delivered product may vary from the one shown above.
  • In some cases, packaging may differ from OEM/original retail box. For bulk orders that are packaged together, product manuals or CDs may not always be available for each item.
  • The shipping cost added at the checkout is a general estimate which is subject to change depending on size/weight/quantity of ordered goods.
  • Orders that contain end of life (EOL) products that are no longer in production may be replaced by a compatible product with the same FRU number offering same functionality.
  • Refurbished printers may not have full ink cartridges or laser toners.
  • Once an order is processed at our warehouse, it cannot be cancelled. A returned order will likely incur a restocking fee. See RMA page for details about restocking fees.
  • Please note if you are concerned about any of the above conditions or have any questions, we highly recommend that you contact us on sales@ithardwaregroup.co.uk or call 020 37908599 before placing an order
View AllClose
X