Supermicro SuperWorkstation SYS-7048A-T Dual LGA2011 1200W 4U Rackmount/Tower Workstation Barebone System (Black)

Specifications

• Mfr Part Number: SYS-7048A-T
• Motherboard: Super X10DAi
• Processor: Dual LGA2011
  • Supports Xeon E5-2600 v3 Family Processors
  • Supports up to 18 Cores
  • Supports up to 45MB Cache
  • Supports up to 145W TDP
  • QPI up to 9.6 GT/s
• Chipset: Intel C612 Express
• Memory: 16x 288pin DDR4-2133/ 1866/ 1600 DIMM Slots, Supports up to 1TB ECC Load Reduced Memory or up to 512GB ECC/REG Memory
• Slots: 3x PCI-Express 3.0 x16 Slots, 2x PCI-Express 3.0 x8 Slots, 1x PCI-Express 2.0 x8 Slot (runs at x4)
• SATA: 10x SATA3 Ports, Support RAID 0, 1, 5, 10
• Audio: RealTek ALC889 7.1-Channel High Definition Audio CODEC
• LAN: Intel i210 Dual Port Gigabit Ethernet Controller
• Drive Bays: 8x 3.5" Hot-swap SATA/SAS Drive Trays; 3x 5.25" Peripheral Drive Bays
• Backplane: SAS/SATA Hard Drive Backplane w/ AMI MG9072
• Ports: 6x USB 3.0 Ports (4 rear, 2 via header), 5x USB 2.0 Ports (2 rear, 2 via header, 1 Type-A), 2x Serial Port (1 rear, 1 via header), 2x RJ45 LAN Ports
• Form Factor: 4U Rackmountable / Tower
• Power Supply: 1200W 80 PLUS Platinum Certified High-efficiency Power Supply, w/ PMBus
• System Cooling: 2x 2800RPM Fans, 1x 2700 RPM Fan
• Front Panel:
  • Buttons: Power On/Off, System Reset
  • LEDs: Power, Hard Drive Activity, 2x Network Activity, System Overheat/Fan Fail
• Color: Black
• Dimensions (WxDxH): 7.0 x 25.5 x 17.8 inch / 178.0 x 648.0 x 452.0 mm
• Gross Weight: 71.0 lbs / 32.2 kg
• RoHS Compliant

• Product images are for illustrative purposes only therefore the delivered product may vary from the one shown above.
• In some cases, packaging may differ from OEM/original retail box. For bulk orders that are packaged together, product manuals or CDs may not always be available for each item.
• The shipping cost added at the checkout is a general estimate which is subject to change depending on size/weight/quantity of ordered goods.
• Orders that contain end of life (EOL) products that are no longer in production may be replaced by a compatible product with the same FRU number offering same functionality.
• Refurbished printers may not have full ink cartridges or laser toners.
• Once an order is processed at our warehouse, it cannot be cancelled. A returned order will likely incur a restocking fee. See RMA page for details about restocking fees.
• Please note if you are concerned about any of the above conditions or have any questions, we highly recommend that you contact us on sales@ithardwaregroup.co.uk or call 020 37908599 before placing an order