EVGA 850 B3 220-B3-0850-V1 850W 80 PLUS Bronze ATX12V & EPS12V Power Supply w/ Fully Modular & EVGA Eco Mode

Specifications

• Mfr Part Number: 220-B3-0850-V1
• Features:
  • Fully Modular to reduce clutter and improve airflow
  • 5 Year Warranty and unparalleled EVGA Customer Support
  • 80 PLUS Bronze certified, with 85% efficiency or higher under typical loads
  • Heavy-duty protections, including OVP (Over Voltage Protection), UVP (Under Voltage Protection), OCP (Over Current Protection), OPP (Over Power Protection), SCP (Short Circuit Protection), and OTP (Over Temperature Protection)
  • EVGA ECO Intelligent Thermal Control System elminates fan noise at low to medium loads
• Maximum Power: 850 W
• Input:
  • Voltage: 100 ~ 240 VAC
  • Current: 10 A
  • Frequency Range: 50 ~ 60 Hz
• Type: ATX12V / EPS12V
• Efficiency: 85% or Higher Typical
• MTBF: 100,000 hours
• Fan: 1x 130mm Long Life Sleeve Bearing Fan
• Output: +3.3V @ 24A, +5V @ 24A, +12V @ 70.8A, +5VSB @ 3A, -12V @ 0.5A
• Connectors: 1x 24pin ATX Connector, 1x 8(4+4)pin EPS (CPU) Power Connector, 6x 8(6+2)pin PCI-Express Connector, 9x SATA Connectors, 3x 4-pin Peripheral Connectors, 1x Floppy Connector
• Approvals: TUV, CB, CE, FCC, RCM, cTUVus, WEEE, RoHS, Compliance with ErP Lot 6 2013 Requirement
• Dimensions (WxLxH): 150.0 x 160.0 x 85.0 mm
• Weight: 5.0 lbs

• Product images are for illustrative purposes only therefore the delivered product may vary from the one shown above.
• In some cases, packaging may differ from OEM/original retail box. For bulk orders that are packaged together, product manuals or CDs may not always be available for each item.
• The shipping cost added at the checkout is a general estimate which is subject to change depending on size/weight/quantity of ordered goods.
• Orders that contain end of life (EOL) products that are no longer in production may be replaced by a compatible product with the same FRU number offering same functionality.
• Refurbished printers may not have full ink cartridges or laser toners.
• Once an order is processed at our warehouse, it cannot be cancelled. A returned order will likely incur a restocking fee. See RMA page for details about restocking fees.
• Please note if you are concerned about any of the above conditions or have any questions, we highly recommend that you contact us on sales@ithardwaregroup.co.uk or call 020 37908599 before placing an order