Cisco 4G LTEA, LTE, and 3G Omnidirectional Dipole Antenna (LTE-ANTM-SMA-D) - LTE-ANTM-SMA-D

SpecificationsManufacturer: Cisco Systems, IncManufacturer Part Number: LTE-ANTM-SMA-DManufacturer Website Address: http://www.cisco.comBrand Name: CiscoProduct Model: LTE-ANTM-SMA-DProduct Name: 4G LTEA, 4G LTE, and 3G Omnidirectional Dipole Antenna (LTE-ANTM-SMA-D)Marketing Information: The LTE-ANTM-SMA-D omnidirectional dipole antenna is designed for indoor use with Cisco 4G Long Term Evolution (LTE) and Long Term Evolution Advanced (LTEA) Service Routers (ISRs) and Pluggable Modules with an SMA connector.The LTE-ANTM-SMA-D antenna is marked with a dual green band to indicate that it supports Cisco LTEA routers and modules. This antenna has the following features: Support for frequencies of 698-960, 1448-1511, and 1710-2690 MHz. Standalone antenna peak gain of less than 3.7 dBi in the supported frequency bands. Articulating joint that can maneuver into three stop positions: 0°, 45°, and 90°. Male SubMiniature A connector that allows direct mounting of the antenna to any Cisco supported router or Pluggable Module with an SMA connector. The SMA connector design has added rotational frictional torque to ensure the SMA interface stays properly mated, and to reduce chances of a disconnect. The design is also more finger friendly compared to a classic SMA hex nut design. For optimal performance, we strongly recommend that you use two antennas to take full advantage of MIMO technology on all Cisco cellular routers that support MIMO (4G LTE and later releases).Product Type: AntennaTechnical InformationDirectivity: Omni-directionalFrequency Band Type: UHFFrequency: 698 MHz to 960 MHz1.45 GHz to 1.51 GHz1.71 GHz to 2.69 GHzAntenna Gain: 3.7 dBiInterfaces/PortsConnector Type: SMAPhysical CharacteristicsHeight: 9"Width: 1.5"Depth: 0.4"Weight (Approximate): 2 ozMiscellaneousApplication/Usage: Wireless RouterModule

• Product images are for illustrative purposes only therefore the delivered product may vary from the one shown above.
• In some cases, packaging may differ from OEM/original retail box. For bulk orders that are packaged together, product manuals or CDs may not always be available for each item.
• The shipping cost added at the checkout is a general estimate which is subject to change depending on size/weight/quantity of ordered goods.
• Orders that contain end of life (EOL) products that are no longer in production may be replaced by a compatible product with the same FRU number offering same functionality.
• Refurbished printers may not have full ink cartridges or laser toners.
• Once an order is processed at our warehouse, it cannot be cancelled. A returned order will likely incur a restocking fee. See RMA page for details about restocking fees.
• Please note if you are concerned about any of the above conditions or have any questions, we highly recommend that you contact us on sales@ithardwaregroup.co.uk or call 020 37908599 before placing an order