APC Back-UPS BE850M2 9-Outlet 850VA 450W 120V UPS System

Specifications

• Mfr Part Number: BE850M2
• Output:
  • Output Power Capacity: 450Watts / 850VA
  • Max Configurable Power: 450Watts / 850VA
  • Nominal Output Voltage: 120 V
  • Output Frequency (Sync to Mains): 50/60 Hz ±1 Hz
  • Topology: Standby
  • Waveform Type: Stepped approximation to a sinewave
  • Output Connections: 3x NEMA 5-15R (selector_surgetitle); 6x NEMA 5-15R (Battery Backup)
  • Transfer Time: 6ms typical - 10ms maximum
• Input:
  • Nominal Input Voltage: 120 V
  • Input Frequency: 50/60 Hz ± 3 Hz (auto sensing)
  • Input Connections: NEMA 5-15P
  • Cord Length: 1.52 meters
  • Input Voltage Range for Main Operations: 92 - 139V
  • Number of Power Cords: 1
• Batteries & Runtime:
  • Battery Type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte - leakproof
  • Typical Recharge Time: 8 hours
• Communications & Management:
  • Interface Ports: USB
  • Control Panel: LED status display with On Line - On Battery - Replace Battery and Building Wiring Fault
  • Audible Alarm: Alarm when on battery - distinctive low battery alarm - overload continuous tone alarm
• Surge Protection and Filtering:
  • Surge Energy Rating: 354Joules
• Audible Noise at 1 Meter From Surface of Unit: 45 dBA
• Dimensions: 327.0 x 105.0 x 139.0 mm
• Weight: 9.04 lbs / 4.1 kg

• Product images are for illustrative purposes only therefore the delivered product may vary from the one shown above.
• In some cases, packaging may differ from OEM/original retail box. For bulk orders that are packaged together, product manuals or CDs may not always be available for each item.
• The shipping cost added at the checkout is a general estimate which is subject to change depending on size/weight/quantity of ordered goods.
• Orders that contain end of life (EOL) products that are no longer in production may be replaced by a compatible product with the same FRU number offering same functionality.
• Refurbished printers may not have full ink cartridges or laser toners.
• Once an order is processed at our warehouse, it cannot be cancelled. A returned order will likely incur a restocking fee. See RMA page for details about restocking fees.
• Please note if you are concerned about any of the above conditions or have any questions, we highly recommend that you contact us on sales@ithardwaregroup.co.uk or call 020 37908599 before placing an order